Follow
Sign Up to Our Newsletter

Get creative science and art activities straight to your inbox!

DIY Snow Globe: How to Make One in a Jar With Kids

  • ico 3-4 ,  5-8 ,  9-10
  • ico 5 to 20 min
  • ico Easy

Total
0
Shares
Homemade snow globe made from an upside-down glass jar with a Santa figure and falling silver glitter

This DIY snow globe is made from an empty glass jar, a small Christmas figure, water, a spoonful of glycerin and some glitter. Turn it over and the snow drifts down around Santa. It takes about ten minutes, plus a few minutes for the glue to cool. Children can do most of it, and an adult does the hot glue.

List of Materials

Show full list

Test the figure first: put the lid on with the figure resting on it and check that the jar closes. A short figure sits low in the globe; glue it onto an upturned bottle cap to raise it. Plastic, glass or glazed ceramic figures last best. Bare metal can rust and painted wood or paper soaks up water. Glycerin is sold with baking supplies in supermarkets and at chemists. Chunky glitter or sequins sink evenly and are easy to see; fine glitter dust can clump or float on top. A plastic jar is a good choice for toddlers, as it won’t break if it’s dropped. For a globe you want to keep all season, use cooled boiled water, or distilled water, instead of tap water.

Safety information
The hot glue is an adult job. Low-temperature glue guns still run at about 120 °C and standard ones at about 190 °C, and the glue sticks to skin. If hot glue touches skin, cool it under cool running water for 20 minutes and don’t peel the glue off. Glass jars can break. Let children carry and shake the finished globe over a table or a soft surface, and an adult should deal with any cracked jar. Keep glitter away from babies and toddlers, and away from eyes. Glycerin is a common baking ingredient, but it stings if it gets in eyes, and the finished water isn’t for drinking. Glitter gets everywhere, so work on a tray. When you empty a globe, pour the water through a sieve or kitchen paper and bin the glitter rather than washing it down the sink.

Step by Step Instructions

1
of 7

Adult step: run a ring of hot glue around the bottom of the figure.

Adult running hot glue around the hollow white base of a ceramic Santa figure with a purple glue gun
2
of 7

Press the figure onto the inside of the lid, right in the middle, and hold it still for about a minute while the glue sets. Leave it to cool fully before it goes into the water.

Ceramic Santa figure standing on the inside of a white jar lid after gluing
3
of 7

Fill the jar with water to just below the neck. The figure will push the water up when it goes in.

Water being poured from a glass into an empty glass jar in front of fairy lights
4
of 7

Add a spoonful of glycerin and stir. It makes the snow fall a little more slowly.

A spoonful of glycerin held beside a jar two-thirds full of water, with the caption Glycerin
5
of 7

Sprinkle in a pinch of glitter. Watch how slowly it sinks.

Silver glitter sprinkled from a small pot into a jar of water
6
of 7

Lower the figure into the jar, upside down, and screw the lid on tightly (an adult gives it a final twist).

Hand screwing a gold lid onto a water-filled jar with a Santa figure hanging upside down inside
7
of 7

Turn the jar over so it stands on its lid, and watch the snow fall around your figure.

Hand turning a homemade Santa snow globe upright on its lid as glitter swirls inside

Video Tutorial for DIY Snow Globe

More Christmas crafts for the same afternoon: cut a window full of paper snowflakes, or turn a family photo into a DIY photo ornament.

The Science Explained

The snow falls slowly because each glitter flake is thin and flat, so the water’s drag quickly balances its weight. Glitter is heavier for its size than water, so it always sinks, but slowly. Each flake is thin and flat, and as it falls it has to push water out of the way. That push-back is called drag. A flat flake has a big surface for its tiny weight, so as it speeds up, the push-back quickly grows until it balances the flake’s weight. From then on the flake falls at a slow, steady speed: it drifts instead of dropping.

Glycerin is a thick, syrupy liquid, about 1,400 times thicker than water. Stirring a spoonful into a whole jar only thickens the water a little, so the snow falls a little more slowly. Add more glycerin and the water gets thicker, and the snow slows down more.

Try it: drop a pinch of glitter into a glass of plain water and another into water with a few spoonfuls of glycerin, and see which snow lands first.

ico

Tips for Success

ProblemWhy it happensFix
The figure falls off the lidHot glue grips smooth metal poorly and can let go after weeks underwaterScuff only the small patch under the figure with sandpaper and cover it completely with glue, so no bare metal touches the water. Let the glue cool fully before it goes in. For a globe to keep for years, an adult can use waterproof epoxy instead
The jar leaksThe lid isn’t tight or the thread is wetDry the thread, tighten the lid, then run a line of glue around the outside of the seal (do this last, once you’re happy with the water level)
A big air bubble at the topNot enough waterOpen it, top up until the water is level with the rim, and close it again
Glitter clumps or floatsFine glitter dust traps airUse chunkier glitter or sequins; stir before closing and scoop out floaters
The snow falls too fastNot enough glycerinReplace some of the water with glycerin, up to about a quarter of the jar
The water turns cloudy or green after a few weeksMinerals and tiny living things in tap water, and sunlightRemake it with boiled or distilled water and keep it out of direct sun
The water turns orangeA metal part is rusting, usually a scratch inside the lid or a metal figureUse a plastic or ceramic figure and don’t scratch the lid’s coating

Can You Make a Snow Globe Without Glycerin?

Yes. Plain water works: the snow just falls faster. Some makers use a squeeze of clear glue or light corn syrup instead, which thickens the water in the same way. Baby oil isn’t a good swap, because oil doesn’t mix with water and floats as a separate layer.

Frequently Asked Questions

How long does a homemade snow globe last?

Made with boiled or distilled water, a tight lid and a waterproof figure, it should last through the season. If the water clouds or the glue lets go, open it up, clean it and refill it.

What can I use as snow in a snow globe?

Glitter is the classic snow, and white or silver looks most like the real thing. Sequins or tiny star confetti work well too and are less likely to clump than fine glitter. Avoid anything that soaks up water, such as paper or pom-poms.

Total
0
Shares
Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest
Related Posts

Get creative science and art activities straight to your inbox!