Follow
Sign Up to Our Newsletter

Get creative science and art activities straight to your inbox!

DIY Photo Ornaments: A Glitter Keepsake Kids Can Make

  • ico 3-4 ,  5-8 ,  9-10
  • ico 20 to 60 min
  • ico Easy

Total
0
Shares
Two homemade photo ornaments with red and cream ribbon bows hanging on a Christmas tree in front of fairy lights

These DIY photo ornaments turn a printed family photo and a clear plastic lid into a sparkly Christmas decoration. We first made them with photos for the grandparents, and then the boys wanted ones with their own pictures. Children trace, glue and glitter the photo; an adult does the hot glue. Star confetti sealed inside the lid moves when you shake it, and the plastic won’t shatter if it falls off the tree.

List of Materials

Show full list

The lid sets the size of the ornament, so pick the photo after you pick the lid. Faces should sit in the middle of the circle. A photo printed at a shop or on photo paper works best: ink from a home inkjet printer can smear when wet glue goes on the front, so test a corner first. Sequins or small paper punch shapes can replace the confetti.

Safety information
A hot glue gun is an adult job. Even a low-temperature gun runs at roughly 120–150 °C (250–300 °F) and a standard one at about 190 °C (380 °F), and the glue stays hot and sticks to skin, so it can burn even after it leaves the nozzle. Keep children’s fingers away from the nozzle and the fresh glue. If hot glue touches skin, cool the burn under cool running water for 20 minutes. Glitter and confetti are small parts: keep them away from babies and toddlers, and glue the lid all the way round so nothing can leak out of the finished ornament. Glitter gets everywhere, so work on a tray or a sheet of newspaper; keep glittery fingers away from eyes and wash hands afterwards. A permanent marker and glue won’t wash out of clothes or tables, so cover the table. Help younger children with the scissors.

Step by Step Instructions

1
of 7

Lay the lid on the photo, with the faces in the middle, and trace around the outside of the lid with the marker. Cut the circle out about 2–3 mm inside the line, so it fits inside the lid’s rim. Younger children can trace while an adult cuts.

Hands holding a clear plastic lid on a printed family photo and tracing around it with a black marker
2
of 7

Draw patterns on the photo with the glue: swirls, arcs, dots or a frame around the edge. Keep the glue off the faces.

Hands drawing glue lines on a circle cut from a family photo with a white glue bottle
3
of 7

Spoon glitter over the wet glue, then tip the extra off onto the tray. Let the glue dry completely before the next step (about half an hour), so the glitter doesn’t smear.

A teaspoon of turquoise glitter being sprinkled over glue lines on a round photo
4
of 7

Pour a small spoonful of glitter confetti into the clear lid.

Silver star confetti poured into a clear plastic lid held over the table
5
of 7

Adult step: run a thin line of hot glue around the edge of the photo. Press the photo, picture side down, into the lid, so the confetti is trapped inside and the picture shows through the clear plastic. Glue only the rim, so no glue shows on the front.

Adult hand holding the glittered photo next to a clear lid with star confetti and a purple hot glue gun
6
of 7

Adult step: fold a short piece of ribbon into a loop and glue its ends to the top of the back of the ornament.

Red ribbon loop being hot-glued to the white back of a homemade photo ornament
7
of 7

Tie a small bow. Adult step: glue it to the front with a dot of hot glue, just under the loop. Your ornament is ready to hang.

Finished photo ornament with a red ribbon loop and bow, turquoise glitter swirls and star confetti

Video Tutorial for DIY Photo Ornaments

Making more decorations this December? Cut a window full of paper snowflakes, or try our colour changing chameleon craft on a rainy afternoon.

Who Does Which Step?

  • Ages 3–4: choose the photo, draw glue lines, spoon on glitter and confetti, pick the ribbon. An adult traces, cuts and does all the hot glue.
  • Ages 5–8: trace and cut the circle, decorate it, and tie the bow. An adult does the hot glue.
  • Ages 9–10: trace, cut, decorate and tie the bow. An adult glues the photo, the loop and the bow (or the child uses a low-temperature gun with an adult right next to them).

Tips for Success

ProblemWhy it happensFix
The photo won’t sit flat in the lidThe circle was cut on the line, so it’s as big as the outside of the lidTrim a few millimetres off the edge
The ink smearsWet glue on a home inkjet printUse a shop or photo-paper print, or test the glue on a corner first
The photo wrinklesToo much wet glue soaks the paperDraw thin lines, not puddles, and let them dry flat
The lid goes wavyHot glue softens thin plasticUse a low-temperature gun and a thin line
Hot glue shows on the frontGlue spread inside the rimUse a thin line on the very edge only
Confetti leaks outA gap in the glue around the rimRun a second thin line of glue over the gap

Make It a Keepsake

Write the child’s name and the year on the white back with a permanent marker before you glue on the loop. Grandparents love getting a new one each Christmas, and after a few years the set shows how the children have grown. A photo of the whole family, a pet or last summer’s holiday works just as well.

Frequently Asked Questions

Can I turn any photo into a Christmas ornament?

Yes. Any printed photo works: a shop print, photo paper or a home print (test the glue on a corner first, as inkjet ink can smear). Choose one where the faces are big enough to show inside the circle, and print it a little larger than your lid.

How do you make clear ornaments with pictures inside?

Glass balls need the photo rolled up and pushed through the narrow neck, which is fiddly and breakable. A flat clear lid gives the same “picture behind glass” look, and children can do most of it themselves.

Can I make my own personalised baubles without a glue gun?

Strong double-sided tape around the rim can hold the photo in the lid, but test it first: not every glue or tape grips smooth plastic. If you leave the confetti out, there’s nothing to leak.

Total
0
Shares
Subscribe
Notify of
guest
0 Comments
Most Voted
Newest Oldest

Get creative science and art activities straight to your inbox!