Follow
Sign Up to Our Newsletter

Get creative science and art activities straight to your inbox!

Liquid Density Tower Experiment with Salt or Sugar

  • ico 9-10 ,  12+
  • ico 20 to 60 min
  • ico Hard
Total
23
Shares
Rainbow density tower in a tall glass in front of six glasses of coloured water

The rainbow density tower experiment is a great way to teach your kids about how the density of water can change when something is dissolved in it and is a good way to introduce older children to the idea of how salty seawater and freshwater interact in our oceans. Max was amazed by the result of this experiment, and had thousands of questions about what was going on! This experiment can be performed with salt or sugar. It can be performed with at least two different types of food colouring, but the more you use the better it looks! Why don’t you try to make a 3 or 4 layer density tower, or even a 6 layer tower as we did in the video below.

List of Materials for Density Tower Project

Show full list

It’s important to consider the volumes of the glasses and the tall beaker. Ideally, the volume of water in the glasses will fill the tall beaker/vase. If you don’t have the correct equipment for this, just make sure you don’t accidentally fill the tall beaker/vase up with only a few of your mixtures! Ideally, an equal volume of each coloured liquid is added. 

Safety information
This experiment can be messy! Food colouring can stain clothes and surfaces, so cover the table. Use a stable tall glass or vase, and take care with glassware, which can break. Don’t let young children drink the salty water: a lot of salt is harmful. Lots of care and a steady hand is required when transferring the liquids from the glasses to the tall beaker/vase.

How to Make Density Tower: Step by Step Instructions

1
of 11

Fill up the glasses with cold tap water. Remember – use one glass for each different colour of food colouring that you are using!

Six glasses of clear tap water seen from above
2
of 11

Add a few drops of food colouring to each of the glasses, so the water in each glass turns a different colour.

Adding food colouring to six glasses of water, each a different colour
3
of 11

Add the sugar or salt to the glasses. This should be done in an orderly fashion so that the water in the glasses becomes progressively saltier (or sugarier). The first glass should be left without salt/sugar. Using a teaspoon to measure, add one teaspoonful of sugar/salt to the second glass. Add two to the third glass, three to the fourth etc.

Adding a spoonful of sugar or salt to glasses of coloured water
4
of 11

Stir each glass thoroughly with the teaspoon, making sure to wipe down the spoon with a paper towel between glasses. These are now ready to be transferred to the tall beaker/vase!

Stirring the green water with a teaspoon next to five other glasses of coloured water
5
of 11

Pour the glass with the most sugar/salt added into the tall beaker/vase.

Pouring purple water into an empty tall glass
6
of 11

Add the small squares of paper to the tall beaker/vase. You should add enough that they create a near-continuous surface on the top of the water in the beaker.

Dropping small yellow paper squares onto the purple water in the tall glass
7
of 11

Now it’s time to prepare the funnel. Attach the straw to the end of the funnel with some sticky tape.

Taping a straw to the end of a green funnel
8
of 11

Take the funnel and straw and arrange the straw in the beaker so it will feed water to just above the layer of paper squares. If the straw enters the layer of water below, the layers will get mixed up and the experiment won’t work. Similarly, if you pour the water in vigorously or let the water drop from a height, the layers will be disturbed.

Funnel and straw lowered into the tall glass just above the floating paper squares
9
of 11

Carefully and slowly begin pouring the second saltiest glass of water into the funnel, raising the straw as the water level rises.

Yellow water poured through a straw onto purple, blue and green layers
10
of 11

Repeat this process, working from the glasses with the most salt/sugar added, until you get to the one with no salt/sugar added.

Last layer of red water going in through a straw on top of the rainbow layers
11
of 11

Sit back and admire your colourful layers! Over the next few hours the edges will slowly blur as the layers mix.

Six distinct coloured layers in a tall glass, purple at the bottom and red at the top

You may also like 8-Layer Density Column

Video Tutorial

If you liked Rainbow Density Tower, you may like our 8-Layer Density Column experiment too.

What Should Happen

As you pour each new colour onto the paper squares, it should spread out and sit on top of the layer below instead of sinking into it. When you’ve finished, you should have one clear stripe for each glass, with the saltiest (or sugariest) colour at the bottom and the plain water at the top. In our tower that is purple at the bottom and red at the top.

The paper squares float up with each new layer and end up on the surface. Lift them off gently with a spoon when you’ve finished.

The layers look sharpest soon after you finish. Over the next few hours the edges between the colours slowly blur, because the salt or sugar keeps spreading from one layer into the next. Leave the tower for a day or more and the colours blend much further, so take your photos early!

The Science Explained

This experiment doesn’t just look great, it can teach us a few cool things about water and what happens when something dissolves, and about the concept of density.

When a solid substance like salt or sugar is mixed into the water – it disappears! This is because it is soluble – which is a fancy word that means it dissolves. What happens when the salt or sugar dissolves? It doesn’t just disappear: it breaks into pieces far too small to see and spreads all through the water. The water pulls the tiny bits of salt/sugar away from each other and carries them apart. Nature likes things that are evenly spread out, so the salt/sugar will mix into the water until it is evenly spread.

Why do the different coloured layers of water stay distinct from one and another, and not mix? The different layers of water have different amounts of salt/sugar added to them. This changes a characteristic of the water known as density. Water with two teaspoonfuls of salt/sugar dissolved in it is more ‘dense’ compared to water with one teaspoonful of salt/sugar dissolved into it. A good way to imagine salty water is that it is ‘busier’ with salt particles.

More dense, or busier water, is heavier than the same amount of less dense water: a cupful of salty water weighs more than a cupful of plain water. More dense water will want to stay at the bottom of the beaker, and the less dense water will effectively float on top of it. The two liquids will only mix a little but are generally quite happy to stay separate.

ico

Going Deeper Into The Science

When we’re talking about salt/sugar dissolving in water, there are some keywords that we should understand. In this experiment, salt or sugar (or the thing that dissolves) is called a solute, and water (what the sugar/salt dissolves into) is called a solvent. When the salt/sugar is dissolved in the water, a solution is produced. So a solute + a solvent = a solution! 

What happens when sugar or salt dissolves to form a solution? The answer is not as simple as the particles becoming suspended in water. Instead, we have to imagine a salt/sugar molecule and understand what holds it together. Let’s take salt – which is made up of ions of sodium and chloride, which have an ionic bond holding them together (an ionic bond is a force that holds two different particles together through the pull between opposite charges, a bit like static electricity). When salt is added to water, the sodium and chloride ions are more attracted to the slightly charged ends of water molecules than they are to each other. So effectively the water molecules pull the sodium and chloride ions apart, breaking the ionic bond that holds them together! Sugar is different: its molecules don’t break up. Water simply pulls whole sugar molecules away from each other. 

Why do the different coloured layers of water stay distinct and separate, rather than mixing? This happens because the different salt/sugar solutions have different densities. The density of a solution will correlate directly with how much salt/sugar has been added to it. Solutions of different densities won’t mix because the more dense solution will naturally want to sink below the less dense solution (in some ways density can be thought of as how ‘heavy’ a liquid is!). Mixing will occur gradually at the boundary, or if stirred, but otherwise the different solutions are happy to not interact.

This is an interesting concept when we think about salty seawater and the fresh water that is added to the oceans from melting ice (which is fresh, or not salty). Saltwater and freshwater will behave differently – with saltwater sinking deeper in the oceans and freshwater wanting to stay at the surface. This is a very important concept in oceanic science and plays a big part in ocean circulation. Temperature is another important variable in oceanic circulation. If you want to know more about this, google ‘thermohaline circulation’.

Troubleshooting

  • The colours mixed as I poured: pour more slowly, keep the end of the straw just above the paper squares, and raise it as the water rises.
  • Two layers merged into one colour: the two glasses had too similar amounts of salt or sugar. Make the difference between neighbouring glasses bigger.
  • Salt or sugar left at the bottom of a glass: keep stirring until it has all dissolved. Crystals sitting at the bottom don’t make the water any denser.

How to Take the Liquid Density Tower Experiment Further 

Water temperature is a variable that can be altered in this experiment and gives a range of interesting results. 

On the one hand, heat helps a solute to dissolve into a solvent. Why not measure how many spoonfuls of sugar will dissolve in a glass of cold water vs a glass of warm water? (Salt dissolves only a little better in warm water, so sugar gives a clearer result.) 

Temperature is also a major control of density. A cold solution will be denser than a warm one, even if they have the same amount of solute dissolved in them. What happens if the temperature of the different solutions is mixed up, with some being warm and others being cold? (Spoiler alert: your nice colourful layers of water will probably mix!). 

Total
23
Shares
Subscribe
Notify of
guest
3 Comments
Most Voted
Newest Oldest
Jordan Lavina

YOOOOOOOOOOOOOOOO THIS IS SICK BRUHHH CAN YOU BE MY DAD LAB

John

Thank you! I will try it with my daughter tonight

Related Posts

Get creative science and art activities straight to your inbox!